|
Series 2 - 3 Sections |
 |
| Superior Camera Support System |
The MAGICA 2.3 has a height of 138cm and supports up to 12kg load. This is the strongest and most stable camera support system on the market.
| |
|
HEIGHT (w/o column)
|
138.0 cm |
| SECTIONS |
3 |
| WEIGHT |
1.37 kg |
| LOWEST |
17.0 cm |
| COLUMN |
rapid |
| FOLDED |
65.0 cm |
| LOAD |
12.0 kg |
|
|
Please note: The center column of the tripod will be included
with the shipment even though we recommend mount the ball head directly
at the Markins adapter plate.
For more information:
|
This high-capacity ball head
has the following characteristics, unique in the market of pro ball
heads:A hard-anodized surface, so durable and scratch resistant that it
is 30% stronger than stainless steel.
A precision machined titanium center bolt. Light weight but stronger than ever.
An astonishing load capacity-to-weight ratio of over 80:1.
Rated for up to in excess of 45kg (100 lbs)
While only weighting 490 grams (1.08 lbs).
This is an improvement of over 50% compared to other manufacturers
(typical load-to-weight ratio of 20:1 to 50:1) With this terrific
load-to-weight ratio, you can use one and the same head for all of your
cameras, no matter if 35mm, medium or large format cameras. The extra
load capacity ensures superior smoothness.
|
 |
 |
|
|
The Markins Tripod Base TB-21 plate gives your new Gitzo Mountaineer Series 2 tripod (with a "1" at the end) additional stability and vibration dampening.
It
is mounted between the ball head and the tripod base, eliminating the
center column for closer to the ground shots and to further reduce
weight
The base plate is machined in duraluminum, very nicely finished and hard anodized.
Comes with its own stem bolt and stem, a hollow threaded tube to allow use of the Gitzo hook
|
|
|
|
 |
|
|
|
This new 3-sections legged GT2531 tripod greatly improves sturdiness
and increases the load capacity of its predecessor by 50% while keeping
its same light weight.
This new tripod replaces the G1257, the previously preferred choice
of advanced amateurs and professionals for 35mm film or digital SLRs
with small to medium weight lenses, and for lightweight 6x6 medium
format cameras
Gitzo’s new generation of 6X carbon fiber tripods incorporates the
proven revolutionary design process that reduces overall tripod weight
without sacrificing strength or stability.
Further more, this new series of GT models, introduces the G-Lock
system, adding sturdiness to substantially increase its load capacity.
| The
new G-Lock leg locking system increases system rigidity by 20% and
allows quicker and stronger leg locking. Gitzo has added a solid
machined aluminium upper disc with a new Safe Lock material that cuts
vibration and improves grip between tripod and head. The upper disc can
also be fitted directly to the upper casting, removing the center
column for ground level photography or to save weight. All new
Mountaineer tripods come with a convenient anti-dust bag for storage
and packing.
|
|
|
Unparalleled strength
The Gitzo carbon fiber tubes use an exclusive process to ensure stiff,
light tubes resistant to bending, with good tensile and compression
strength, a high degree of stability in extreme temperatures, vibration
absorption, withstanding fatigue better than other carbon fiber tube
processes.
| Nikonians OP/TECH TRIPOD LEG WRAPS™ Limited Edition. Each leg is
individually wrapped to protect the legs against damage, to give you
added comfort against shoulder fatigue and to keep the cold metal legs
"under wraps" and away from your skin. The durable Cordura® leggings
are stretched snugly over the foam pads to form a seamless, comfortable
fit. |
 |
 |
|
| The diameter of the leg wraps can be stretched by approx 0.2 inches
(5mm). You should always pick a leg wrap size that is smaller than the
diameter of the thickest section (the leg wrap should then be max 0.2
inches/5mm smaller) to get a snug fit. |
|
|
The new Markins Titanium spikes for Gitzo GT tripods are not only elegant and efficient but posses ultimate extremely durability
Compared to the standard rubber feet, the spikes give your tripod a new
class. Crafted out of titanium, they do not wear down like aluminum
spikes do.
If you are often outdoors with your Gitzo, these spikes are a must
They come with a set of rubber shoes for indoors use
|
|
 |
|
|
With the Markins titanium spikes:
- You achieve better ground contact when outdoors
- You reduce tripod vibration for sharper images
- You increase the lifetime of your Gitzo tripod
This is a set of three spikes for one tripod.
|
 |
{/slides}
|
