http://magica-tripod.com

EnglishGerman formal - SieUSEnglish formalSpanish  - Español Formal Neutro Usted UTF-8Russian
MAGICA - 3.4 Print E-mail

  Series 3 - 4 Sections icon_tallest.gif
  Superior Camera Support System

 

The MAGICA 3.4 has a height of 150cm and supports up to 18kg load. This is the strongest and most stable camera support system on the market. 

 
   
 HEIGHT (w/o column)  150.0 cm
 SECTIONS  4
 WEIGHT  2.1 kg
 LOWEST  16.0 cm
 COLUMN  rapid
 FOLDED  60.0 cm
 LOAD  18.0 kg

 

 

 
magica_assembled.jpg

 

 Measurement of the MAGICA 3.4 tripod:
Specs
Load
Kg/lbs
Weight
Kg/lbs
Folded size
cm/inches

Max height w/o* centercolumn
cm/inches

Max height WITH centercolumn
cm/inches

Min height
cm/inches
Load to Weight Ratio
GITZO   
GT3541L 18/39.6 2.13/4.7 60/23.6 159/62.6 181/71.3 16/6.3 8.5
* This height equates the original MAGICA height with the mounted base plate and ball head.
 

Please note: The center column of the tripod will be included with the shipment even though we recommend mount the ball head directly at the Markins adapter plate.


For more information:

 

This high-capacity ball head has the following characteristics, unique in the market of pro ball heads:A hard-anodized surface, so durable and scratch resistant that it is 30% stronger than stainless steel.

A precision machined titanium center bolt. Light weight but stronger than ever.

An astonishing load capacity-to-weight ratio of over 80:1.

Rated for up to in excess of 45kg (100 lbs)

While only weighting 568 grams (1.25 lbs).



This is an improvement of over 50% compared to other manufacturers (typical load-to-weight ratio of 20:1 to 50:1) With this terrific load-to-weight ratio, you can use one and the same head for all of your cameras, no matter if 35mm, medium or large format cameras. The extra load capacity ensures superior smoothness.

 markins_photoproshop.jpg
 m20_2007_description_shop.jpg  

The Markins Tripod Base TB-30 plate gives your Gitzo Mountaineer Series 3 tripod additional stability and vibration dampening.

It is mounted between the ball head and the tripod base, eliminating the center column for closer to the ground shots and to further reduce weight

The base plate is machined in duraluminum, very nicely finished and hard anodized.

Comes with its own stem bolt and stem, a hollow threaded tube to allow use of the Gitzo hook

 markins_photoproshop.jpg    
 tb20_photoproshop.jpg      

 

GT3541L MOUNTAINEER CARBON FIBER 6X ALR G-LOCK TRIPOD

The new Carbon Fiber GT3541L tripod adds considerable sturdiness and maintains the light weight.

By having 4-section legs, it is more compact when collapsed than the GT3531 and reaches the height level of the tripod it replaces, the previous G5330

The preferred choice of advanced amateurs and professionals for 35mm film or pro digital SLRs with medium to long and heavy lenses, for 6x6 medium format and view cameras.

gt3541l_photoproshop.jpg

   

Gitzo’s new generation of 6X carbon fiber tripods incorporates the proven revolutionary design process that reduces overall tripod weight without sacrificing strength or stability.

Further more, this new series of GT models, introduces the G-Lock system, adding sturdiness to substantially increase its load capacity.

 

 

 

 

 

 

 

 

 

 

 

Nikonians OP/TECH TRIPOD LEG WRAPS™ Limited Edition. Each leg is individually wrapped to protect the legs against damage, to give you added comfort against shoulder fatigue and to keep the cold metal legs "under wraps" and away from your skin. The durable Cordura® leggings are stretched snugly over the foam pads to form a seamless, comfortable fit.  Nikonians_photoproshop.jpg
 well-dressed_photoproshop.jpg  
The diameter of the leg wraps can be stretched by approx 0.2 inches (5mm). You should always pick a leg wrap size that is smaller than the diameter of the thickest section (the leg wrap should then be max 0.2 inches/5mm smaller) to get a snug fit.  

The new Markins Titanium spikes for Gitzo GT tripods are not only elegant and efficient but posses ultimate extremely durability

Compared to the standard rubber feet, the spikes give your tripod a new class. Crafted out of titanium, they do not wear down like aluminum spikes do.

If you are often outdoors with your Gitzo, these spikes are a must

 

They come with a set of rubber shoes for indoors use

 markins_photoproshop.jpg
 ers-222.jpg  

With the Markins titanium spikes:

  • You achieve better ground contact when outdoors
  • You reduce tripod vibration for sharper images
  • You increase the lifetime of your Gitzo tripod

 

This is a set of three spikes for one tripod. 

 Titanium_Spikes_photoprosho.jpg

{/slides}

 
Home
What is a MAGICA
Model Overview
MAGICA - 2.3
MAGICA - 2.4
MAGICA - 3.3
MAGICA - 3.4
Gitzo Tripod Configurator
Gold Membership
Partners
Resources
Buy Online!

In cooperation with:

markins_photoproshop.jpg
   
 photoproshop.jpg
 
Nikonians_photoproshop.jpg